|
Manufacturers ID: BHF-G1/4-12
Description
Enzotech does not only produce great-looking coolers, their fittings also are true eye-candy! With their matte black finish these fittings are something truly unique on the watercooling market. These barbed fittings were truly designed for "high flow"! The inner diameter is very large to keep the flow resistance as low as possible. The short outer thread of only 5mm makes the use of spacer rings obsolete in most cases where one would usually be required. Technical specifications : Extent of delivery: The connectors for imperial hoses(7/16", 3/8", œ") are provided with measurements in mm in our shop. These can differ by +-1mm, which is no problem as hose clamps have to be used for installation. If the hose is to be mounted without a clamp, a larger fitting should be chosen. With some fittings that tend to be larger, it is possible though that a hose with an inner diameter of 13mm actually does seal without a hose clamp. Overview: 10mm (3/8") hose clamp: up to 8mm none, from 10mm up required 10mm (7/16") hose clamp: up to 8mm none, from 10mm up required 12mm (1/2") hose clamp: up to 11mm none, from 12mm up required 13mm (1/2") hose clamp: up to 11mm none, from 13mm up required This product will be shipped, unless otherwise specified, without a printed manual. For questions regarding the installation of the product, please contact our support. |
|
